Bomag BW 213 BVC-5 Продаја - Island

PITAJ ZA CENU
PITAJ ZA CENU
OSNOVNE INFORMACIJE
Grupa proizvodaValjci sa jednim bubnjem
Brend/ModelBomag BW 213 BVC-5
Godina proizvodnje2016
Sati korišćenja2.186 h
Zemalja
Mascus ID68C632CF
CENA
Cena bez PDV-aPitaj za cenu
DETALJI
Poslednja inspekcija13.02.2020
Opšte stanje (1-5)
Broj prethodnih vlasnika1
Evidencija svih servisaDa
EPA označenoDa
Proizvodnja/Serijski broj101586201002
Klasa emisijeStage IV
Bruto težina13.820 kg
Tip kabineZatvorena kabina
Transportne dimenzije (DxŠxV)5870 x 2130 x 2990
mm
Zemlja proizvodnjeNemačka
CertifikatiEPA, CE
Dodatna oprema
  • - Klima uredjaj
Ostale informacijeThis Bomag is equiped with Vario Control wich means that the amplitude can be adjusted manually or automatically. With sensitivity when close to vulnerable structures, or with full compaction power: Maximum quality is always guaranteed with minimum passes. The system cuts cost per cubic metre.

With the machine comes also a Bomag BCM05 compaction computer BCM 05 makes the roller a QA tool, as the BCM 05 tablet PC communicates with the BOMAG roller, and also processes EVIB and ECONOMIZER values. In addition to the
“pass” and “temperature” parameters created by BCM start, a true map of compaction values is also created in BCM 05.
Another component of BCM 05 is the software tool BCM office. This allows convenient creation and management
of projects. Preparation and analysis take place in the site office; the roller driver simply has to start up the tablet PC.
Communication between the tablet and office is by USB stick.
The import of points and lines from other GIS applications
allows real mapping of the construction site, making orientation easier. On site, points can be created to enable
measuring locations to be assigned to them.
There are comprehensive aids available in BCM office for
statistical analysis and correlation of the measured results. All results are displayed clearly as required using the
print manager. The data is safe from manipulation. All parameters can be analysed at any time. Every roller track
and every position is saved. Variations and compliance
with specified values are visible. All this with a high resolution of up to 10 cm.
This provides efficient self-monitoring and helps keep clients satisfied! The BCM 05 can demonstrate that the contractor has done everything to spec. The BCM 05 is the
only system on the market that can work without a GPS
receiver. This can be really useful, e.g. when working in
tunnels or inside structures. Only the tracks to be rolled
are defined

Vélafl ehf

+354...POKAŽI
Molimo vas pomenite Mascus kada kontaktirate prodavca
Pošaljete e-mail

Kontakt osoba

  • GUNNAR KARL THORDARSON

    Vélafl ehf
    • +354...POKAŽI
      Molimo vas pomenite Mascus kada kontaktirate prodavca
    • +354...POKAŽI
      Molimo vas pomenite Mascus kada kontaktirate prodavca
    • Jezici: Engleski
    • Rauðhella 11., 221 Hafnarfjörður, Island

Kompanija

VÉLAFL EHF
12
GODINE AKTIVAN NA MASCUSU

Slični brendovi

BrendBroj oglasa
Caterpillar34207
Volvo8961
Liebherr8785
Komatsu7088
JCB4321

Na Mascus.rs ćete naći mašine brenada Bomag BW 213 BVC-5 iz kategorije valjci sa jednim bubnjem. Cena te Bomag BW 213 BVC-5 mašine je -, registrovana je bila 2016 godine. Ta mašina se nalazi u - Island. Na Mascus.rs nadjite još mnogo drugih mašina marke Bomag BW 213 BVC-5 kao i drugih mašina iz kategorije valjci sa jednim bubnjem. Detalji - Poslednja inspekcija: 13.02.2020, Opšte stanje (1-5): 4, Broj prethodnih vlasnika: 1, Evidencija svih servisa: Da, EPA označeno: Da, Sati korišćenja: 2.186 h, Proizvodnja/Serijski broj: 101586201002, Klasa emisije: Stage IV, Bruto težina: 13.820 kg, Tip kabine: Zatvorena kabina, Transportne dimenzije (DxŠxV): 5870 x 2130 x 2990 mm, Zemlja proizvodnje: Nemačka, Certifikati: EPA, CE